Air Valves

Air Valves allow metered fluid flow in one or both directions. They are used in Pneumatic Circuits to regulate the rate of activation or exhaust of cylinders and other Pneumatic Devices. We manufacture and export this valve at large.

More Detail

Sluice Gate Valve

We have Sluice Gate Valves that is tight in sealing-surface contact with a domed seal ring. Our Sluice Gate Valve is fixable having an intermediate sluice-gate plate, a sluice-gate wall that encompasses a valve side of a sluice-gate aperture.

More Detail

RS Gate Valve

Our RS Gate Valve are known as 'Knife Valves' or 'Slide Valves' that are linear motion valves in which a flat closure element slides into the flow stream to provide shut-off. Gate Valves and Knife Valves are designed to minimize pressure drop across the valve in the fully opened position and stop the flow of fluid completely.

More Detail

Reflux Valve

Reflux Valve is used in the suction line of the pumping system to prevent the back flow, when the pump is at the rest. It is a one-way valve, opening upward. We are manufacturing Reflux Valves of various sizes range.

More Detail

Pressure Reducing Valve

We have Pressure Reducing Valve is an automatic control valve designed to reduce a higher inlet pressure to a lower constant outlet pressure regardless of fluctuating flow rates and/or varying inlet pressure.

More Detail

Pressure Balanced Plug Valve

We have Pressure Balanced Plug Valves to adjust hot and cold-water pressures to maintain constant temperature. Our Pressure Balanced Plug Valve is used on two or three handle shower sets. Unit automatically adjusts the hot and cold inlet pressures in order to maintain a constant temperature.

More Detail

Globe Valve

We are a leading Manufacturer of Globe Valves, which are linear motion valves with rounded bodies, from which their name is derived. They are widely used in industry to regulate fluid flow in both on/off and throttling service.

More Detail

Gate Valve

Gate Valve also known as 'Knife Valves' or 'Slide Valves' are linear motion valves in which a flat closure element slides into the flow stream to provide shut-off. Gate Valves and Knife Valves are designed to minimize pressure drop across the valve in the fully opened position and stop the flow of fluid completely.

More Detail

Forged Valve

We are professional Forged Valves manufacturers. We have Forged Valves with different features. We designed Forged Valves, which are compact but extremely sturdy for high pressure-temperature service. We offer very reasonable prices.

More Detail

Diaphragm Valves

We are a leading manufacturer and exporters of Diaphragm Valves. Our valves are suitable for any inert or corrosive gaseous and liquid media, subject to the correct choice of body and diaphragm material.

More Detail

Solenoid Valve

We have Solenoid Valve that are low-pressure steam types with ethylene propylene discs and gaskets. Other solenoid valve types include high-pressure steam types with Teflon reinforced discs and ethylene propylene gaskets available in 2 way, normally closed brass bodies.

More Detail

Ball Valve

Ball Valves provide tight shut-off and character control. They have high range ability due to the design of the regulating element, without the complications of side loads typical of Butterfly or Globe Valves. We manufacture and export a wide range of Ball Valves.

More Detail